ASTM A210 Grade A-1 Carbon Steel Seamless Tubes

ASTM A210 Grade A-1 Specification

ASTM A210 Grade A-1 Carbon Steel Seamless Tubes are Medium Carbon Steel Tubes with max 0.27 % carbon content with combination of max 0.93 % manganese. These Tubes are most commonly used for general purpose applications worldwide. ASTM A210 Grade A-1 Tubes are ductile and strong Tubes with long wearing properties. These Tubes are manufactured as per ASME Specification and commercially referred as carbon steel Tubes.

Related Specifications of ASTM A210 Grade A-1

ASTM A106 ASTM A161 ASTM A179 ASTM A192 ASTM A199 ASTM A209 ASTM A210 ASTM A213 ASTM A234 ASTM A333 ASTM A334 ASTM A335 ASTM A420 ASTM A519 ASTM A524 ASTM A53 ASTM A795 ASTM A822

ASTM A210 Grade A-1 Properties

Chemical Properties

Carbon	Silicon	Manganese	Phosphorous	Sulphur	Molybdenum	Nickel	Chromium	Copper	Others
max 0.27	min 0.10	max 0.93	0.035	0.035	–	–	–	–	–

Mechanical Properties

Yield Strength		Tensile Strength			Elongation A5 min
MPa min	ksi min	MPa min	MPa min	ksi min	Percentage
		415	–	60	30

Equivalent Designation

DIN	EN	BS	NFA	ASTM	ASME
DIN 17175 Grade St 45.8	EN P235GH Grade 10216-2	NFA A 49-215 Grade TU 42-c	ASTM A210 Grade A-1	ASME SA 210 Grade A-1	UNI C18

Materials

Carbon Steel
Alloy Steel

Low Temperature Carbon Steel
High Temperature Carbon Steel

Low Temperature Alloy Steel
High Temperature Alloy Steel

Types of ASTM A210 Grade A-1 Carbon Steel Seamless Tubes

Pipes

Seamless Pipes

Cold Drawn Seamless Pipes
Hot Drawn Seamless Pipes

Welded Pipes

Electric Resistance Welded(ERW) Pipes
Continous Welded(CW) Pipes
Submerged Arc Welded(SAW) Pipes
Double Submerged Arc Welded(DSAW) Pipes
Spiral Welded Pipes
High Frequency Induction(HFI)
Longitudinally Submerged Arc Welded(LSAW) Pipes

Tubes

Seamless Tubes

Cold Drawn Seamless Tubes
Hot Drawn Seamless Tubes

Welded Tubes

Electric Resistance Welded(ERW) Tubes
Continous Welded(CW) Tubes
Submerged Arc Welded(SAW) Tubes
Double Submerged Arc Welded(DSAW) Tubes
Spiral Welded Tubes
High Frequency Induction(HFI)
Longitudinally Submerged Arc Welded(LSAW) Tubes

Hollow Sections

Pipes

Boom Pipe
Culvert Pipes
Square Pipes
Round Pipes
Honed Pipes

Tubes

Boom Tubes
Culvert Tubes
Square Tubes
Round Tubes
Honed Tubes

Delivery Executions of ASTM A210 Grade A-1 Carbon Steel Seamless Tubes

Tube Ends

All tubes are supplied with clean, square cut ends.Deburring and/or chamfering can be carried out on request.

Tube surface

Tubes are supplied normally without anti-corrosive treatment, but anti-corrosive treatment is available and is carried out on request.

Protection

Black and Bare
External Varnished with Black or Clear LAcquer

Mill test certificate

MTC is issued in accordance with EN 10204.

Packaging

ASTM A210 Grade A-1 Carbon Steel Seamless Tubes are bundled as standard, with steel straps into hexagonal bundles with one end flush.Length sorting can be carried out on request. Tubes can also be bundled in multiples. Bundle weights are adjusted as requested by the customer. Each bundle contains tubes from a single cast/heat only.

Marking

ASTM A210 Grade A-1 Carbon Steel Seamless Tubes is marked with tube type, heat number, steel grade and size. Information is repeated along the whole length of the tube. Other markings, such as stamping, can be made on request. Bundles are also labeled with a tag having info both alphanumeric and by bar code.

Labelling

ASTM A210 Grade A-1 Carbon Steel Seamless Tubes delivered direct from our mill is labeled in accordance with automotive standard, ie with both alphanumeric and bar code information. Customer specific data can be added on request.

Dimensional Standards of ASTM A210 Grade A-1 Carbon Steel Seamless Tubes

FEDERAL

WWP-404c is similar to ASTM A-53 except that Government inspection and continuous identification marking of electric weld and seamless is mandatory. It covers black and galvanized welded and seamless pipe for flanging, bending, and coiling and for use with fresh water, oil, steam, air, and gas on shore plus a limited number of shipboard uses. Sizes 1/8 inch through 24 inch.WWP-406c is a federal specification comparable to ASTM A-120 (withdrawn 1988). Mills can certify that A-120 pipe in a distributor-s stock meets all the requirements of WWP-406c.

A.W.W.A.

C-200 covers black welded and seamless pipe intended for the conveyance of water in sizes 6 inch and larger. Specification prescribes hydrostatic test pressures for sizes of pipe covered. Tensile, flattening, and bending tests are required.

ASME

B31.1 Code for pressure piping.plants, and industrial plants.
B31.2 Fuel Gas Piping.
B31.3 Petroleum Refinery Piping.
B31.4 Liquid PetroleumTransportation Piping Systems.
B31.5 Refrigeration Piping.
B31.7 Nuclear Power Piping
B31.8 GasTransmission and Distributing Piping Systems. Covers design, fabrication, installation, inspection, testing, and the safety aspects of operation and maintenance of gas transmission and distribution systems.

ANSI (ASME)

B36.10 American Standard for Wrought-Steel and Wrought-Iron pipe. Designates dimensions, weights, and schedule numbers for welded and seamless pipe. Schedules 10 through Schedules Double Extra Heavy (DXH/XXH).
B36.19 American Standard for Stainless Steel Pipe. Designates dimensions, weights, and schedule numbers for welded and seamless Stainless Steel Pipe, Schedules 5 through Schedules 80.

A.A.R.

M-111 covers black and galvanized welded and seamless pipe intended for coiling, bending, flanging, and other special purposes and is suitable for welding. Purpose for which pipe is intended should be stated on orders. M-111 is comparable in most requirements to ASTM A-53.
M-130 covers black and galvanized welded and seamless pipe for ordinary uses in steam, water, gas, and air lines. Sizes 1/8 inch through 12 inch. Pipe to this specification is not intended for close coiling, bending, or high temperature service. M-130 is comparable in most requirements to ASTM A-120.

Product Description

ASTM A210 Grade A-1 specification covers several grades of minimum wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and super heater tubes. Recommended pipe size will be developed by FerroPipe upon receipt of your inquiry. A print or sketch of the part to be produced should be included. Grade, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.

FerroPipE is considered as the most Reliable ASTM A210 Grade A-1 Tubes Supplier from India.

ASTM A210 Grade A-1 Carbon Steel Seamless Tubes stockist in Mumbai, India.Ferropipe stocks a complete range of IBR Certified ASTM A210 Grade A-1 Carbon Steel Seamless Tubes in outer diameter tube sizes ½”-24” and Nominal bore NB sizes 15NB-600NB in Mumbai, India. Exporting Carbon Steel Pipes and Alloy Steel Pipes to countries worldwide including IRAN, IRAQ, KUWAIT, QATAR, South Africa, Nigeria, Saudi Arabia, Australia, Canada & Mexico.

Product Identification

In addition to the marking specified in Specification A 999/A 999M, the marking should have the length, an additional symbol -S-, if ASTM A210 Grade A-1 Carbon Steel Seamless Tubes conforms to any of the Supplementary Requirements S1 to S6, the schedule number of the pipe is ordered to a schedule number viz. SCH 5,10,20,30,40,60,80,100,120,140,160,XS, XXS, STD, and the heat number of or manufacturer-s number by which the heat can be identified as per ASTM A210 Grade A-1.

Permissable Variations

Wall Thickness : the minimum wall thickness at any point or end on ASTM A210 pipes and tubes shall not be greater than 12.5% under the nominal thickness specified.
Inner Diameter: For pipe ordered in inside diameter, the inside diameter shall not vary more than ñ 1% from the required/specified inside diameter.

Inspection Certification

The Manufacturer shall provide Material Test certificate of inspection to the purchaser stating that the material has been manufactured, sampled, tested, and inspected in accordance with ASTM A210 Grade A-1( including year of issue), and has satisfied all the requirements of ASTM A210.

Material Certification

Pipes and Tubes manufactured as per ASTM A210 Grade A-1 are certified with En 10204 Type 3.1/3.2. IBR,NACE,HIC,IGC,IMPACT are adhered as supplementary testing requirements.

Delivery

Ferropipe is india's leading carbon steel pipe stock and alloy steel pipe stock and pipe stockist, pipe suppliers, pipe exporters, importer ,pipe dealers, stockholders, indentor, pipe manufacturers, retailers, wholesaler, pipe distributors, traders, specialized in delivering consignments on time by means of Express Courier Services DHL, FedEx, UPS, TNT, etc. to the remote locations.